Primers and Sealers
Notes KO-SEAL PRIMER SEALER (KS) A two-component acrylic urethane primer sealer. KO-SEAL II has two series of products: one series meeting the VOC requirements for National Rule, and one series meeting the VOC requirements for SCAQMD Rule 1151. KO-Seal is easy to sand and is available in black, white and metallic colors.
Availability Readily Available
Tech Sheet KO-SEALII.pdf
Notes KO-SEAL PRIMER SEALER (KS) A two-component acrylic urethane primer sealer. KO-SEAL II has two series of products: one series meeting the VOC requirements for National Rule, and one series meeting the VOC requirements for SCAQMD Rule 1151. KO-Seal is easy to sand and is available in black, white and metallic colors.
Availability Limited Availability
Tech Sheet KO-SEALII.pdf
Notes KO-SEAL PRIMER SEALER (KS) A two-component acrylic urethane primer sealer. KO-SEAL II has two series of products: one series meeting the VOC requirements for National Rule, and one series meeting the VOC requirements for SCAQMD Rule 1151. KO-Seal is easy to sand and is available in black, white and metallic colors.
Availability Readily Available
Tech Sheet KO-SEALII.pdf
Notes KO-SEAL PRIMER SEALER (KS) A two-component acrylic urethane primer sealer. KO-SEAL II has two series of products: one series meeting the VOC requirements for National Rule, and one series meeting the VOC requirements for SCAQMD Rule 1151. KO-Seal is easy to sand and is available in black, white and metallic colors.
Availability Limited Availability
Tech Sheet KO-SEALII.pdf
Notes KO-SEAL PRIMER SEALER (KS) A two-component acrylic urethane primer sealer. KO-SEAL II has two series of products: one series meeting the VOC requirements for National Rule, and one series meeting the VOC requirements for SCAQMD Rule 1151. KO-Seal is easy to sand and is available in black, white and metallic colors.
Availability Readily Available
Tech Sheet KO-SEALII.pdf
Notes KO-SEAL PRIMER SEALER (KS) A two-component acrylic urethane primer sealer. KO-SEAL II has two series of products: one series meeting the VOC requirements for National Rule, and one series meeting the VOC requirements for SCAQMD Rule 1151. KO-Seal is easy to sand and is available in black, white and metallic colors.
Availability Limited Availability
Tech Sheet KO-SEALII.pdf
Notes CHROMATE FREE EPOXY PRIMER (KP-2CF) KP-2CF is designed to work over bare steel, aluminum, magnesium, fiberglass, galvanized surfaces, and some woods and plastics. It's strong adhesion, fast build, and ease of sanding (wet or dry), make it a logical choice for the base of a lasting paint job. It may also be applied to repair areas for fast filling touchups.
Availability Readily Available
Tech Sheet KP-2CF.pdf
Notes CHROMATE FREE EPOXY PRIMER (KP-2CF) KP-2CF is designed to work over bare steel, aluminum, magnesium, fiberglass, galvanized surfaces, and some woods and plastics. It's strong adhesion, fast build, and ease of sanding (wet or dry), make it a logical choice for the base of a lasting paint job. It may also be applied to repair areas for fast filling touchups.
Availability Readily Available
Tech Sheet KP-2CF.pdf
Notes CHROMATE FREE EPOXY PRIMER (KP-2CF) KP-2CF is designed to work over bare steel, aluminum, magnesium, fiberglass, galvanized surfaces, and some woods and plastics. It's strong adhesion, fast build, and ease of sanding (wet or dry), make it a logical choice for the base of a lasting paint job. It may also be applied to repair areas for fast filling touchups.
Availability Readily Available
Tech Sheet KP-2CF.pdf
Notes CHROMATE FREE EPOXY PRIMER (KP-2CF) KP-2CF is designed to work over bare steel, aluminum, magnesium, fiberglass, galvanized surfaces, and some woods and plastics. It's strong adhesion, fast build, and ease of sanding (wet or dry), make it a logical choice for the base of a lasting paint job. It may also be applied to repair areas for fast filling touchups.
Availability Readily Available
Tech Sheet KP-2CF.pdf
Notes BLEED CHECK SEALER (SBS-10) A two-component acrylic urethane sealer designed to stop bleed through. It stops bleeding colors from interfering with graphics and artwork.
Availability Limited Availability
Tech Sheet SBS10-BLEEDCHECK.pdf
Notes KD2000 Direct to Metal Primer has been formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding. These primers emit very low amount of Volatile Organic Chemicals (VOCs), Hazardous Air Polluting Solvents (HAPS), and contain no isocyanates. KD2000 may be applied to properly cleaned and sanded aluminum, steel, galvanized steel, sand blasted steel, fiberglass and SMC. Can be reduced up to 10% with RU reducer. Mix 4 parts KD2000 to 1 part KDA2000 to 1 part RU Series Reducer (for 2.1 VOC, RU300 must be used).
Availability Limited Availability
Tech Sheet KD2000.pdf
Notes KD2000 Direct to Metal Primer has been formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding. These primers emit very low amount of Volatile Organic Chemicals (VOCs), Hazardous Air Polluting Solvents (HAPS), and contain no isocyanates. KD2000 may be applied to properly cleaned and sanded aluminum, steel, galvanized steel, sand blasted steel, fiberglass and SMC. Can be reduced up to 10% with RU reducer. Mix 4 parts KD2000 to 1 part KDA2000 to 1 part RU Series Reducer (for 2.1 VOC, RU300 must be used).
Availability Limited Availability
Tech Sheet KD2000.pdf
Notes KD2000 Direct to Metal Primer has been formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding. These primers emit very low amount of Volatile Organic Chemicals (VOCs), Hazardous Air Polluting Solvents (HAPS), and contain no isocyanates. KD2000 may be applied to properly cleaned and sanded aluminum, steel, galvanized steel, sand blasted steel, fiberglass and SMC. Can be reduced up to 10% with RU reducer. Mix 4 parts KD2000 to 1 part KDA2000 to 1 part RU Series Reducer (for 2.1 VOC, RU300 must be used).
Availability Not usually carried in stock (a 12 week delivery)
Tech Sheet KD2000.pdf
Notes KD2000 Direct to Metal Primer has been formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding. These primers emit very low amount of Volatile Organic Chemicals (VOCs), Hazardous Air Polluting Solvents (HAPS), and contain no isocyanates. KD2000 may be applied to properly cleaned and sanded aluminum, steel, galvanized steel, sand blasted steel, fiberglass and SMC. Can be reduced up to 10% with RU reducer. Mix 4 parts KD2000 to 1 part KDA2000 to 1 part RU Series Reducer (for 2.1 VOC, RU300 must be used).
Availability Limited Availability
Tech Sheet KD2000.pdf
